Entrance page
Automatic tube cutting
machines RTA
Tube cutting machine
- trimming of curved tubes
Tube end conditioning
Tube end conditioning - NEW
Tubes for solar-energy
Storing and feeding tubes
References = exemplary
About us
Imprint / Directions
Press articles

design + marketing:
Michael Richter

tube processing from coil for solar energy

Tube processing from a coil - here: for solar energy plants / collectors

  Cut copper tubes chipless and with low burrs

Using coils when processing copper tubes offers
remarkable price advantages compared to rods:
Deletion of first cut and end pieces and storage
advantages (compact storage of coils).

With the user frieddly straightening devices you
reach calibrated tube diameteres within close toleran-
ces. If necessary the tube also can be hardened
during straightening.

Cost effective production is depending on reliably
working machines and this is realized with the
decoiling equipment.

This system, consisting of a driven decoiler,
sensibly reacting air-suspension and the straigh-
tening device has proven its reliability already in
tough production environments and allows pro-
cessing of tubes with an outer diameter of up
to 28 mm.

Cutting tubes chipless the cut/pull-technique
guarantees cuts with low burrs. Deburring,
washing or similar is no more necessary and
mandrels may be inserted without problems
due to the insignificant reduction of the tubes
in the cutting area.

Thanks to a newly developed cut-pressing-
procedure using the tube cutting machine RTA 75,
with each separately driven knife and pressure
roll, sensitive adjustment possibilities are
available, that e. g. allow to add outer chamfers
to the tube end in only one working process.

Besides of processing coils the treatment of
rods is possible. In this process the rods are
separated automatically from the bundle and
fed to the tube cutting plant.

The cut tube pieces are fed into boxes by a
special sorting system. By that the tube
rods can be cut into 2 or 3 different tube

For large tube diameters a 'pulling' of the
tubes us no more possible. In these cases
the patented 'pull/break system' is used.

(In case both materials - coils and rods -
should be treated both feeding procedures
can be combined)


Your keywords:
Tube cutting plant, chipless cutting
of tubes, saw tubes, process copper
tubes from the coil, tubes for solar
collectors, solar energy plants, solar
cells, solar collectors

Coil-tube-supply with uncoiler and equalizing roll

Straightening device with 9 rolls.
Adjustment without clamping

Attachable straightening rolls
(no fixing necessary)

* Send page to a friend

Request for documentation